Etcher
The full guide

How Etcher works

Etcher turns a photo into a laser engraving. A laser burns thousands of tiny dots into the surface, close together where your photo is dark and spread out where it's light, so from arm's length you see your picture in shades of brown. This guide takes you through every step, with what to look out for.

Before you start

1. Choose the right photo

This is the step that decides how good it looks. A laser can only burn what's in the photo, and it turns colour into shades of one brown, so the photo needs clear light and dark areas.

What works

What to avoid

iPhone photos: most open as they are. If one won't, share it to yourself as a JPEG (or set Camera → Formats → Most Compatible) and try again.

2. Draw around your subject

Your photo appears in the studio. Press and hold your finger (or mouse button) on the edge of your subject, trace all the way round, and let go when you get back to where you started. Everything inside your line is engraved; everything outside disappears, so the coaster shows just your subject on clean wood.

When the automatic cut-out is switched on, you'll also see "Cut it out for me": type what's in the photo (dog, car, house) and it finds the outline for you. You can still draw your own line afterwards.

3. Choose the material and shape

MaterialLooks likeBest for
Basswood plywoodPale, smooth and even; burns dark brownPhotos and fine detail, on anything from a keyring to a coaster
Sapele plywoodRich reddish-brown wood; burns near blackBold pictures and names with a warm, classy look
BambooPale honey wood with a fine straight grain; burns deep chocolate brownFaces, fur, fine detail, photos with lots of shading
Light woodPlain pale timber; burns dark brownEveryday coasters and tags
CorkSpeckled warm tan, soft and grippy; burns a mid brownBold, simple subjects, silhouettes and names
Black or red acrylicGlossy and bright; the engraving comes out pale and frostedKeyrings and names that pop; bold pictures more than soft photos
Stainless steelBrushed silver; marks dark grey and never fadesKeyrings and pet tags that last: round 20 or 30 mm tags, dog tags and bone tags, with the ring hole already in
Black aluminiumSatin black; the engraving shows bright silverCards, dog tags and bone-shaped pet tags: crisp, high-contrast and hard-wearing
PU or real leatherSoft brown; burns a darker brownKeyrings, patches and gifts with a warm feel
FeltSoft grey fabric; marks a darker greySimple shapes and names; not fine photos
SlateDark grey stone; the engraving comes out paleCoasters with strong pictures and big shapes
ShapeSizeGood to know
Round coaster90 mm acrossThe classic. Your subject sits in the middle with a margin round the edge.
Square coaster95 × 95 mmA little more room; suits cars and houses, which are wider than tall.
Key tag50 × 30 mmSmall: pick one face or a simple shape, and keep a name short.
Round keyring or pet tag20 or 30 mm acrossTiny: one face or a bold shape, and a name of a few letters. The picture sits below the ring hole. The 20 and 30 mm round steel tags are the ones Bambu Lab sells.
Dog tag keyring50 × 28 mmThe ring hole is at one end, so the picture sits beside it. Steel or black aluminium.
Pet tag, dog bone50 × 28 mmA bone shape with the ring hole at one end. With a name, the picture sits at the left and the name in the middle of the bone; with no name, the picture fills it. Steel, black aluminium, or cut from wood, cork, acrylic or leather.
Card85 × 54 mmBlack aluminium, wallet size: a photo and a name, or a message.

Switch between them in the studio and watch the preview; it's the quickest way to choose.

4. Add a name (optional)

5. Fine-tune the picture (only if you need to)

Most photos look right as they are. Open "Fine-tune the picture" if the preview looks muddy or washed out.

6. Read the preview

The preview isn't a filter: it's drawn from the actual file the laser will follow, at the same 0.1 mm per dot. Zoomed in it looks dotty; from arm's length it looks like your photo, and so will the real one.

7. Take the files

Looking after it

Questions

Do you keep my photo?

When you draw around your subject yourself, your photo never leaves your device. When you press Remove the background (in the studio or the photo tools), it's sent to our own machine in Perth, used once to find the background and not kept, and no other company sees it.

Can I use a colour photo?

Yes, almost every photo is colour. The engraving is shades of one brown, so what matters is light and dark, not colour.

Can I engrave just text, or a logo?

A logo works: use a clear image of it, press "Use the whole photo" or draw around it, and pick Bold style. Text on its own isn't an option yet, but the name line under a picture is.

Why does the preview look dotty?

Because the laser burns dots, about ten to the millimetre. On screen you're seeing them close up; on the real piece they blend into a smooth picture.

Give it a go

The preview is free and takes a couple of minutes.

Make yours